Eurocircuits organizes 2 interesting 1-day seminars for electronics designers at Eurcocuits Aachen!

Content

  • eC-workshop – high speed design
  • eC-workshop – KiCAD

April 4 – 2017 – eC-workshop – high speed design.

 

Creating complex layouts with modern EDA-tools is a lot easier than it has been in the past. However there are still challenges one has to face when using state of the art technology. Especially hi-speed designs that make use of DDR2/3-RAM and fast serial interfaces like LVDS and hi-speed USB may pose a challenge.

This workshops deals with the issues that arise when creating layouts for such hi-speed designs. One needs to consider suitable multilayer-stackups as well as controlled impedance and signal propagation delay.

There are a lot of tools available to help with these issues, but most of these tools are quite expensive. In this workshop we will examine how to create sophisticated hi-speed layouts using EAGLE and tools that are either open-source of free of charge.

More on this eC-workshop here!

For participant convenience and to ensure the best possible quality of the workshop, we limit the number of participants per session to 10. Register for this seminar via this link.

April 5 – 2017 – eC-workshop – KiCAD.

 

KiCAD is a free & open-source software suite for EDA. For a while now the layout engine of KiCAD has been more powerful than similar layout engines of some commercial EDA suites.

KiCAD is available for Windows, OSX and Linux – in binary and source code.

This workshop covers schematics capture and layouts using KiCAD.

More on this eC-workshop here!

For participant convenience and to ensure the best possible quality of the workshop, we limit the number of participants per session to 10. Register for this seminar via this link

We hope to welcome you in our factory Eurocircuits Aachen in Baesweiler – Germany.

Kind regards,

Christof Vercouter

Christof.vercouter@eurocircuits.com

Electronics & Automation 2017 – Gratis toegang en een leuk beursgadget – registreer en reserveer nu !

Inhoud

  • Gratis beurstoegang
  • Gratis beursgadget – beperkt aantal

Gratis naar de E&A beurs.

Als Eurocircuits relatie kan u nu al registreren via deze link en verzekert u zich van uw gratis toegangsbewijs.

Gratis beursgadget – wees er als de kippen bij!

Het aantal beursgadgets, KISS LoRa, is beperkt.

E&A17_2

Samen met een ganse groep FHI-leden van de branche Industriële Elektronica maken we het weer mogelijk dat u een leuk beursgadget, “KISS LoRa”, kan verwerven.

KISS LoRa is een draadloos sensor/actuatorplatform met IoT-functionaliteit. Tijdens E&A2017 kan aan de live productielijn ontdekken hoe de deelnemers het beursgadget live produceren.

Reserveer nu via deze link, want binnen een week zal iedereen kunnen registreren en is het aantal gadgets mogelijk snel uitgeput.

Wij hopen velen onder jullie te mogen verwelkomen.

Met vriendelijke groeten,

Matthieu Samain

matthieu.samain@eurocircuits.com

Electronics & Automation 2017 Free entry ticket and fun gadget – register and reserve now!

Content

  • Free entry ticket
  • Free gadget – limited availability

Visit the E&A exhibition without entry fee

Eurocircuits customers can already register for a free entry ticket via this link.

Challenging exhibition gadget – only early birds can get one!

The amount of exhibition gadgets, KISS LoRa, is limited

E&A17_2

An enthusiastic group of FHI-members of the branch Industrial Electronics have created an interesting exhibition gadget, “KISS LoRa”.

KISS LoRa is a wireless sensor/actuator platform with IoT-functionality. During E&A2017 you can discover how the gadget is produced on a live running production line.

Reserve your gadget now via this link, then one week from now, all will be able to register and reserve a gadget which could lead to shortage and you missing out on this opportunity.

We hope to welcome you end of May.

Kind regards,

Matthieu Samain

matthieu.samain@eurocircuits.com

Eurocircuits at Southern Manufacturing and Electronics show 2017

Eurocircuits are renowned for their quality Prototype PCB’s and Equipment but did you know we also provide solder paste stencils for precise application of solder paste to your design.

So the question is how do you achieve that professional production quality on a prototype design? Eurocircuits have the answer, we developed a unique free service of eC-registration where we place registration holes in a frame around your boards and registration holes in the stencil for precise, repeatable stencil alignment.

But the most impressive part to this is how to cost effectively align the board and stencil we have developed with a reusable system we call eC-stencil-fix you can see how it works below:

The Southern Manufacturing and Electronics show is free to visit and runs 21st  – 23rd March 2017 In Farnborough.

See first-hand how Eurocircuits can help you produce professional assembly of your prototype designs.

You can check out more of our prototype solutions on our YouTube channel: https://www.youtube.com/user/eurocircuits.

We look forward to welcoming you there!

Steve Jones

Eurocircuits is out there for you !

Eurocircuits present at LED event in Belgium and Holland.

Come and experience our full range of PCB manufacturing services at LED event and register here for a free entry ticket.

 

LED event in Belgium takes place at Technopolis in Mechelen on the 30th of November and is supported by 5 partners and 33 exhibitors making it a fine one day event for all parties interested in LED-technology, it’s applications and application manufacturing requirements. The seminar program can be found here.

LED event in the Netherlands takes place at Congrescentrum 1931 in Den Bosch on the 1st of December, is supported by 4 partners and 37 exhibitors. The seminar program can be found here.

Hope to meet you on one of these days and don’t forget to register for a free entry ticket.

For those who can’t make it to the show or can’t wait to meet us …

 

We have made a new presentation movie of our production plants. The movie shows the production flow of a 4-layer multi layer, in the mean time presenting our latest investments in production equipment and online tools.



Hope this may inspire you to come and meet us at LED event next week.

Technical blogs

Production:

eC-tools:

eC-equipment:

EAGLE:

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology, PCB soldering or EAGLE CAD, email us at euro@eurocircuits.com

 

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at:

 

 

Eurocircuits at Matelec 2016

First, we would like to thank you for your presence in our stand last week in Madrid Matelec. It was a pleasure to have the opportunity to present our company and its services and products.

Then some documentation about our design guidelines attached and these links can have másinformación about our services:

Value-adding online prototype & small batch PCB services
Professional bench-top prototype soldering equipment
www.eurocircuits.com

If you have any questions about our services, website or any aspect of PCB technology, please contact me via email claudio.guardao@eurocircuits.com or porteléfono at +32 15 28 16 30.

Best regards,

Claudio Guardão
Sales – Belgium head office
Tel: +32 15 28 16 30

Claudio.Guardao@eurocircuits.com
www.eurocircuits.com

Eurocircuits at the electronics design show 2016

Thank you for your visit and time at our booth at the Electronics Design show this year.

 

Although an excellent introduction, as your Eurocircuits sales contact I would like to make sure that you have all the information you need about our company and our services.

What can Eurocircuits offer?

We are specialist manufacturers of prototype and small batch PCBs. Our goal is to help you speed up your product cycle and keep costs down by offering comprehensive added-value services with online pricing and ordering. Over the last 15 years we have developed a lean business model that delivers to our customers a wide range of PCB technologies fast, reliable and at low cost. For a full list of these services see the attached specification or go to www.eurocircuits.com.

Low costs

To ensure low prices without compromising quality or delivery we use order-pooling (or “panel-sharing”) technology, that is, we combine orders from several customers on a single standard production panel. This keeps production costs down and we don’t have to charge for tooling or set-up.

Get prices and place orders fast

To access our full range of online services, go to the Price calculator on our home page www.eurocircuits.com. You can get a price and place an order immediately. Alternatively send me the Gerber data to quote for you.

Reliable quality

  • We are not brokers: all boards are manufactured in our own ISO 9000 approved factories in Germany and Hungary or for our new service BINDI pool in our new factory in India.
  • All finished boards are given their own “passport” or Certificate of Conformity listing their manufacturing history, materials used and inspection stages they have passed.

Fast reliable deliveries

  • We offer deliveries from 2 days.
  • In 2014 we shipped 78,000 orders. More than 98% were delivered on or ahead of time.
  • Our online service means no delays in getting prices or placing orders.

Comprehensive technical support – cuts costs, saves time

  • Check your data prior to order using our online PCB Visualizer and Checker. Is the data correct to the order and the design? Are there features that will delay production or push up the cost? An online pre-order check can save 1 – 2 days on time-critical deliveries.
  • We check all boards 100% for manufacturability before production with clear feedback where required.
  • Send us your data prior to order and we will run a full Design For Manufacturability check. Small changes that cut board costs up to 25%
  • Use our online price calculator to get the best combination of technology, delivery and price
  • Our 22 page PCB Design Guidelines outlines best practice to reduce costs and avoid delays to manufacture.
  • Visit our website www.eurocircuits.com for technical white papers and blogs on many aspects of PCB design and manufacturing.

Prototype assembly

Manual assembly of SMDs is a time-consuming and fiddly process. Most sub-contract assembly houses are not interested in prototype or small batch quantities unless there are guaranteed volume orders to follow. We have developed benchtop reflow equipment which allows you to assemble SMD boards quickly and cost-effectively in-house. Using our eC-stencil-mate printer and eC-reflow-mate oven, users tell us that they can cut manual SMD assembly times by up to 70%.

  • Smart online menus for pricing and ordering provide real-time guidance on reducing costs and improving manufacturability. NEW: PCB PIXture your graphic design on your board.
  • PCB Visualizer analyses your Gerber data even before you get a price. It flags any issues which might delay delivery and then fills in the pricing parameters for you automatically.
  • eC-stencil provided by the same data used for the PCB production ensuring accurate solder paste printing and is delivered together with the PCB.
  • RF pool to specialise in cost effective RF PCB manufacture.
  • IMS pool increasing in popularity, Insulated Metal substrates are a key material in the LED lighting industry.
  • eC-equipment specially designed to aid the population of prototypes and small series PCBs: NEW: eC-placer.
  • eC-consumables allow a one stop shop to produce your PCB’s.

If you have any questions please call me on 07794 906982.

And don’t forget to use your discount voucher.

Eurocircuits launches SMS messaging for time critical orders !

Eurocircuits launches SMS messaging for time critical orders

Whenever you are in need of a very fast turn around time for your PCB order or when you have a critical delivery to be made and you want full instant control of the production flow of your board, you can initiate SMS-massaging for your order.

By just inputting your mobile phone number in the order input menu, you trigger the SMS-messaging service. On any of these steps in the flow you will receive an SMS calling for action on our website, or just notifying you of the next step in the flow: pre-production approval, exception, order confirmation, shipped, payment required.

With SMS-messaging, you will not miss out on any important occurrence.

Technical blogs

Production:

eC-tools:

eC-equipment:

EAGLE:

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology, PCB soldering or EAGLE CAD, email us at euro@eurocircuits.com

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at:

  • Electronics Design Show 2016:
    Ricoh Arena, Phoenix Way, Coventry CV6 6GE, UK.
    You can find us at stand L46 from October 19th-20th, 2016. Free tickets can be obtained here.
  • MATELEC 2016:
    IFEMA – Feria de Madrid, Av. Partenón, 5, 28042 Madrid, Madrid, Spain.
    You can find us at stand 4D24 from October 25th-28th, 2016.
    Free tickets van be obtained here. Use CODE “MA160000203XE” to complete the registration for your free ticket.
  • D&E event 2016:
    Congrescentrum 1931, Brabanthallen, Oude Engelenseweg 1, Den Bosch, The Netherlands, 2nd of November 2016.
    Free Tickets can be obtained here.
  • Electronica 2016:
    Neue Messe Munich, Hall A5, booth 502 from 8-11 November 2016.
    We are proud that we can offer all of our Eurocircuits contacts a voucher for day ticket.

Your unique code is:

You can activate this code and obtain your free ticket as explained in this video:

Eurocircuits meets students:

Eurocircuits is out there for you !

Eurocircuits is out there this Autumn. Come and meet us.

Come and experience our full range of PCB manufacturing services during the various events we are exhibiting at this Autumn.

Electronica 2016, Neue Messe Munich, Hall A5, booth 502 from 8-11 November 2016

For most of the shows you can register for a free entry ticket on our web site. One big exception is electronica in Munich. Being the largest electronica event in Europe and probably wold wide, electronica charges for tickets. Therefore we are proud that we can offer all of our Eurocircuits contacts a voucher for day ticket.

Your unique code is:

You can activate this code and obtain your free ticket as explained in this video:

Hope to see you in Munich, hall A5 – booth 502, 8-11 November 2016.

Your code above is unique and can only be used once. You may pass this code to someone else at your discretion. More or other codes are not available.

Eurocircuits will also be present at …

Electronics Design Show – Ricoh Arena, Phoenix Way, Coventry CV6 6GE, UK.

You can find us at stand L46 from October 19th-20th, 2016.

Free tickets can be obtained here.

MATELEC – IFEMA – Feria de Madrid, Av. Partenón, 5, 28042 Madrid, Madrid, Spain.

You can find us at stand 4D24 from October 25th-28th, 2016.

Free tickets van be obtained here.

Use CODE “MA160000203XE” to complete the registration for your free ticket.

D&E event – Congrescentrum 1931, Brabanthallen, Oude Engelenseweg 1, Den Bosch, The Netherlands, 2nd of November 2016.

Free Tickets can be obtained here.

For those who can’t make it to the show or can’t wait to meet us …

We have made a new presentation movie of our production plants. The movie shows the production flow of a 4-layer multi layer, in the mean time presenting our latest investments in production equipment and online tools.

Hope this may inspire you to come and meet us at one of the shows we are attending as exhibitor.

Technical blogs

Production:

eC-tools:

eC-equipment:

EAGLE:

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology, PCB soldering or EAGLE CAD, email us at euro@eurocircuits.com

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at:

Eurocircuits hopes you had a great time visiting the WoTS last week

We would like to thank all visitors that made use of the free entry ticket we have offered them. It made us win the Marketing trophy again. WoTS, an exhibition with 450 exhibitors and more than 21,000 visitors, is for sure a forum of technology worth your visit. We are glad that the Eurocircuits community plays a significant role in this important BENELUX event.

We willen alle bezoekers bedanken die ons aanbod voor een gratis ticket hebben aangenomen. Hierdoor hebben we weerom de marketing cup gewonnen. WoTS, een beurs met 450 exposanten en meer dan 21,000 bezoekers, is een belangrijk technologisch forum en verdient uw bezoek. We zijn blij dat de Eurocircuits community een belangrijke rol speelt in dit BENELUX event.

During the coming weeks, Eurocircuits will be present on lot’s of other events in Europe. We will update you next week.

U zal Eurocircuits de volgende weken nog op meerdere events in Europa kunnen ontmoeten. Volgende week meer info.

More information about the World of Electronics can be found here.

Meer info over de World of Electronics vindt u hier.