KiCAD doesn’t offer an import function for predefined Design Rule files. You should set these up yourself in the KiCAD-interface.

We recommend to set the units in PCB editor – Preferences – General – to millimeters.

Open Design Rule Editor. Here you find two sections. In global Design Rules you will find the Values for minimum Track width, minimum Via Diameter and minimum Via drill diameter. In Net Classes Editor, you will find the Values for minimum Clearance.

KiCAD-logo

In the List below you will find the values for our Standard Services. You can change these to smaller Values, but that has an influence on price.

For more information you can check our classification table and/or check our PCB design guidelines.

Values and Prices can also be checked in our online calculator.

  • OL -> Outer Layer
  • IL  -> Inner Layer
  • Tool Size -> finished Hole Size plus 0.1mm

PCB Design Classification 6C

KiCAD DRU1

KiCAD DRU2

Single sided 35µ

  • Min Track with 0.150mm
  • Min Clearance 0.150mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter 0.600mm

Double sided Base copper 18µ

  • Min Track with 0.150mm
  • Min Clearance 0.150mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter 0.600mm

Double sided Base copper 35µ

  • Min Track with 0.150mm
  • Min Clearance 0.175mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter 0.600mm

Double sided Base copper 70µ

  • Min Track with 0.200mm
  • Min Clearance 0.250mm
  • Min via Diameter 0.35mm (Tool size)
  • Min via Drill Diameter 0.600mm

4 Layer Base copper outer 18µ inner 35µ

  • Min Track with OL 0.150mm
  • Min Clearance OL 0.150mm
  • Min Track with IL 0.150mm
  • Min Clearance IL 0.150mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter OL 0.600mm
  • Min via Diameter IL 0.650mm

6 Layer Base copper outer 18µ inner 35µ

  • Min Track with OL 0.150mm
  • Min Clearance OL 0.150mm
  • Min Track with IL 0.150mm
  • Min Clearance IL 0.150mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter OL 0.600mm
  • Min via Diameter IL 0.650mm

8 Layer Base copper outer 18µ inner 35µ

  • Min Track with OL 0.150mm
  • Min Clearance OL 0.150mm
  • Min Track with IL 0.150mm
  • Min Clearance IL 0.150mm
  • Min via Drill Diameter 0.35mm (Tool size)
  • Min via Diameter OL 0.600mm
  • Min via Diameter IL 0.650mm